Titebond Original Wood Glue

Features & Benefits

Fast set – Shortens clamp time
Bonds stronger than wood
Solvent-resistant
Excellent sandability
Unaffected by finishes
Easy cleanup with water

Specifications

CONFORMS TO ASTM D-4236
Application Guidelines

Application Temperature: Above 50°F (10°C)
Open Assembly Time: 4-6 minutes (70°F./50%RH)
Total Assembly Time: 10-15 minutes (70°F./50%RH)
Minimum Required Spread : Approximately 6 mils or 250 square feet per gallon
Required Clamping Pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Method of Application: Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.

Physical Properties

Type: Aliphatic resin emulsion
Calculated VOC: < 0.2 g/L
State: Liquid
Weight Per Gallon: 9.2 lbs.
Color: Yellow
Dried Film: Translucent
Flashpoint: > 200°F
Solids: 46%
Freeze / Thaw Stability: Stable
Viscosity: 3,200 cps
pH : 4.0
Chalk Temperature: To assure a good bond, 50°F is the lowest recommended temperature of the glue, air and materials during application.
Storage Life: 24 months in tightly closed containers at 75°F
Limitations

Titebond Original Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.

Caution Statement

CAUTION: EYE AND SKIN IRRITANT. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.

Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.